The following is a listing of the Drawing Numbers and Revisions
used for Waters Archive 210000456.ZIP
File Created on 18-MAY-2015 13:56:46 UTC

DWG TYPE   	  DWG NO		 REV
---------  	-----------		-----
ASSEMBLY/PL	210000456		  D
PCB        		510000456		  C
A/W        		610000456		  C
SCHEMATIC  	710000456		  C

NOTE: This Assembly uses a Common PCB Board.  The Artwork and Drill Files
needed to produce this board can be found on the 610000456 Revision C
A/W Document Information Record which is stored in SAP.

The following is a listing of the files contained in
Waters Archive 210000456.ZIP

READ_ME.TXT    					Listing of Archive Files (This File)
AS210000456.pdf					Assembly Drawing (PDF Format)
PC510000456.pdf					Fabrication Drawing (PDF Format)
SC710000456.pdf					Design Schematic (PDF Format)
DIFFS PL210000456-C To PL210000456-D.txt	BOM Diff File
AW610000456_1.gdo				Artwork File Layer 1 (Top)
AW610000456_2.gdo				Artwork File Layer 2
AW610000456_3.gdo				Artwork File Layer 3
AW610000456_4.gdo				Artwork File Layer 4
AW610000456_5.gdo				Artwork File Layer 5
AW610000456_6.gdo				Artwork File Layer 6 (Bottom)
GC210000456.cad					GenCad File
SS610000456_TP.gdo				Artwork File Silkscreen Layer (Top)
210000456.ipc     					IPC 356D File
PL210000456.txt					Bill of Materials (ASCII text format)
SM610000456_BM.gdo				Soldermask Layer (Bottom)
SM610000456_TP.gdo				Soldermask Layer (Top)
SP610000456_TP.gdo				Artwork File SolderPaste (Top)
DR510000456_NP.ncd				Drill File Non Plated Holes
DR510000456_PL.ncd				Drill File Plated Holes
AS210000456.neu					Neutral File
COMP_LOC.CTR					Component Center Locations
735001870.pdf					PCB Fab Notes & Specs
735001207.pdf					Waters RoHS Requirements