****************************************
UUT Report
Serial Number:                200819009C
Date:                               11/7/2019
Time:                               9:33:09 AM
Operator:                        tester
UUT Result:                   Passed
****************************************

Fixture ID:                    Passed
     Fixture ID OK
Fixture Down Detect:           Passed
     Fixture Down
Test Power Supplies:           Passed
   Test Power:                    Passed
        Measurement:              5.00768
        Limits:
           Low:                   4.75
           High:                  5.25
        Comparison Type:          GELE (>= <=)
   Test Power:                    Passed
        Measurement:              12.0053
        Limits:
           Low:                   11.7
           High:                  12.3
        Comparison Type:          GELE (>= <=)
   Test Power:                    Passed
        Measurement:              12.0027
        Limits:
           Low:                   11.7
           High:                  12.3
        Comparison Type:          GELE (>= <=)
Test Display Volts:            Passed
   Measure Volts:                 Passed
        Measurement:              12.003158
        Limits:
           Low:                   11.5
           High:                  12.5
        Comparison Type:          GELE (>= <=)
   Measure Volts:                 Passed
        Measurement:              4.9537844
        Limits:
           Low:                   4.75
           High:                  5.25
        Comparison Type:          GELE (>= <=)
Test Serial Communications:    Passed
   Test Instrument Identification String: Passed
        String:                   Temperature Control Module
        Limits:
           String:                Temperature Control Module
        Comparison Type:          Ignore Case
        Power On Initialization Sequence Complete
   Clear Serial Recieve Buffer:   Passed
   Test Command Monitor Response: Passed
        

   Set TCM Defaults:              Passed
        lreset

   Set TCM Remote ON:             Passed
        remote 1

   Clear Serial Recieve Buffer:   Passed
Test Heaters Exist:            Passed
   Clear Serial Recieve Buffer:   Passed
   Heater 1 Present ?:            Passed
   Heater 2 Present ?:            Passed
   Heater 3 Present ?:            Passed
Test Temperature Accuracy:     Passed
   Clear Serial Recieve Buffer:   Passed
   Channel 1 Accuracy:            Passed
        Measurement:              101.990669
        Units:                    degrees Celsius
        Limits:
           Low:                   101
           High:                  103
        Comparison Type:          GELE (>= <=)
   Channel 2 Accuracy:            Passed
        Measurement:              101.889038
        Units:                    degrees Celsius
        Limits:
           Low:                   101
           High:                  103
        Comparison Type:          GELE (>= <=)
   Channel 3 Accuracy:            Passed
        Measurement:              101.889038
        Units:                    degrees Celsius
        Limits:
           Low:                   101
           High:                  103
        Comparison Type:          GELE (>= <=)
Test Temperature Variation:    Passed
   Temp Variation Test:           Passed
        Measurement:              0.07
        Units:                    °C
        Limits:
           Low:                   0.50
        Comparison Type:          LE (<=)
Test Heater Output:            Passed
   Set CHM 1 for 0°C:             Passed
        setchantemp 0 0

   Set CHM 2 for 0°C:             Passed
        setchantemp 1 0

   Set CHM 3 for 0°C:             Passed
        setchantemp 2 0

   Show Heater CHM 1:             Passed
   Set CHM 1 for 125°C:           Passed
        setchantemp 0 125

   Verify Heater 1 On:            Passed
        Number of Loops:          2
        Number of Passes:         2
        Number of Failures:       0
        Final Loop Index:         2
        Heater On
   Verify Heater 1 On (Loop Index: 0): Passed
        Heater On
   Verify Heater 1 On (Loop Index: 1): Passed
        Heater On
   Show Heater CHM 2:             Passed
   Set CHM 2 for 125°C:           Passed
        setchantemp 1 125

   Verify Heater 2 On:            Passed
        Number of Loops:          2
        Number of Passes:         2
        Number of Failures:       0
        Final Loop Index:         2
        Heater On
   Verify Heater 2 On (Loop Index: 0): Passed
        Heater On
   Verify Heater 2 On (Loop Index: 1): Passed
        Heater On
   Show Heater CHM 3:             Passed
   Set CHM 3 for 125°C:           Passed
        setchantemp 2 125

   Verify Heater 3 On:            Passed
        Number of Loops:          2
        Number of Passes:         2
        Number of Failures:       0
        Final Loop Index:         2
        Heater On
   Verify Heater 3 On (Loop Index: 0): Passed
        Heater On
   Verify Heater 3 On (Loop Index: 1): Passed
        Heater On
   Set CHM 1 for 0°C:             Passed
        setchantemp 0 0

   Set CHM 2 for 0°C:             Passed
        setchantemp 1 0

   Set CHM 3 for 0°C:             Passed
        setchantemp 2 0

Test IEEE Communications:      Passed
   IEEE 488 Test:                 Passed
        Number of Loops:          1
        Number of Passes:         1
        Number of Failures:       0
        Final Loop Index:         1
   IEEE 488 Test (Loop Index: 0): Passed

End UUT Report