//Standard HPLC Injection. Tray Name, Sample Number and Sample Volume are taken from the sample list. Air Volume (µl);0;0;SYR.Max Volume Pre Clean with Solvent 1 ();0;0;99 Pre Clean with Solvent 2 ();0;0;99 Pre Clean with Sample ();0;0;99 Filling Speed (µl/s);SYR.Fill Speed;SYR.Min Speed;SYR.Max Speed Filling Strokes ();1;0;99 Inject to;INJECTOR Injection Speed (µl/s);SYR.Inject Speed;SYR.Min Speed;SYR.Max Speed Pre Inject Delay (ms);500;0;99000 Post Inject Delay (ms);500;0;99000 Post Clean with Solvent 1 ();1;0;99 Post Clean with Solvent 2 ();1;0;99 Valve Clean with Solvent 1 ();1;0;99 Valve Clean with Solvent 2 ();1;0;99 CLEANUP(Wash1,Off,Off,On,Off,On,Off,Off,) WAIT_SYNC_SIG(Start,) CLEAN_SYR(Wash1,Pre Clean with Solvent 1,,,,,,,) CLEAN_SYR(Wash2,Pre Clean with Solvent 2,,,,,,,) REPEAT(Pre Clean with Sample,) GET_SAMPLE(SL.tray,SL.index,SL.volume,,,,Filling Speed,,,0,Off,,,) PUT_SAMPLE(Waste,1,,,,,) END() GET_SAMPLE(SL.tray,SL.index,SL.volume,Air Volume,,,Filling Speed,,,Filling Strokes,Off,,,) MOVETO_OBJECT(Inject to,1,,) INJ_SAMPLE(Inject to,Inject,Injected,,,Pre Inject Delay,Injection Speed,Post Inject Delay,1,) SET_INJECTED() CLEAN_SYR(Wash1,Post Clean with Solvent 1,,,,,,,) CLEAN_SYR(Wash2,Post Clean with Solvent 2,,,,,,,) CLEAN_INJ(Wash1,Inject to,Valve Clean with Solvent 1,,,,,,,,Injection Speed,) CLEAN_INJ(Wash2,Inject to,Valve Clean with Solvent 2,,,,,,,,Injection Speed,) CLEANUP(Wash1,Off,Off,Off,On,Off,Off,On,) 06 CLEANUP Wash Station Wash1 Reset Injectors Off Reset Temperatures Off Reset X Y Z On Reset Needle Guide Off Reset Syringe On Close Tray Off Go Home Off WAIT_SYNC_SIG Sync Signal Start CLEAN_SYR Wash Station Wash1 Clean Cycles Pre Clean with Solvent 1 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) CLEAN_SYR Wash Station Wash2 Clean Cycles Pre Clean with Solvent 2 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) REPEAT Count Pre Clean with Sample GET_SAMPLE Source SL.tray Index SL.index Sample Volume(µl) SL.volume Air Volume(µl) Penetration(mm) Fill Volume(µl) Fill Speed(µl/s) Filling Speed Pullup Delay(ms) Eject Speed(µl/s) Fill Strokes 0 Needle Blocking Off Wait for Timer Wait Time(s) PUT_SAMPLE Destination Waste Index 1 Penetration(mm) Volume(µl) Eject Speed(µl/s) Start Timer END GET_SAMPLE Source SL.tray Index SL.index Sample Volume(µl) SL.volume Air Volume(µl) Air Volume Penetration(mm) Fill Volume(µl) Fill Speed(µl/s) Filling Speed Pullup Delay(ms) Eject Speed(µl/s) Fill Strokes Filling Strokes Needle Blocking Off Wait for Timer Wait Time(s) MOVETO_OBJECT Object Name Inject to Index 1 Penetration(mm) INJ_SAMPLE Injector Inject to Sync Signal Inject Injected Signal Injected Penetration(mm) Sample Volume(µl) Pre Inject Delay(ms) Pre Inject Delay Inject Speed(µl/s) Injection Speed Post Inject Delay(ms) Post Inject Delay Start Timer 1 SET_INJECTED CLEAN_SYR Wash Station Wash1 Clean Cycles Post Clean with Solvent 1 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) CLEAN_SYR Wash Station Wash2 Clean Cycles Post Clean with Solvent 2 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) CLEAN_INJ Wash Station Wash1 Injector Inject to Clean Cycles Valve Clean with Solvent 1 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) Inject Penetration(mm) Injection Speed(µl/s) Injection Speed CLEAN_INJ Wash Station Wash2 Injector Inject to Clean Cycles Valve Clean with Solvent 2 Clean Volume(%) Wash Penetration(mm) Fill Speed(µl/s) Pullup Delay(ms) Eject Speed(µl/s) Rinse Time(s) Inject Penetration(mm) Injection Speed(µl/s) Injection Speed CLEANUP Wash Station Wash1 Reset Injectors Off Reset Temperatures Off Reset X Y Z Off Reset Needle Guide On Reset Syringe Off Close Tray Off Go Home On 02